technical description for torqeedo outboard motor Torqeedo electric outboard motor have a revolutionary technique that is currently unique on the market of the electric outboard. The advantages are obvious, non-contact electric motors which are electronically controlled. The employed Earth field magnets are stronger than the traditionaellen Hexaferritemagneten many times, achieved a 6 x field strength and thus a 6-fold greater torque is supplied. The Lithinium manganese batteries are lightweight, have no memory effect, have a high energy density and can supply high currents in a short time. Also, they are cycle fest and a long life span, an integrated GPS receiver have informed about the remaining range and speed over ground. The variable-pitch-variable-camber used by Torqeedo-(VPVC-) propellers are on the latest Sttand of propeller technology.

Unlike standard propellers at this slope and curvature of the propeller not across all segments of the propeller are over (almost) kept constant. Instead, slope and curvature on the basis of the so-called Vortex lattice procedure and a gradual optimization of many thousand iterations for each propeller segment are optimized. The additional possibilities arising from this, enable to bring the propeller-induced extra speed at maximum efficiency. The Toreedo ultralight 402 outboard motor 1 HP is the way gene low weight of only 7 kg for kayaks. The battery is included in the weight. The motor is operated by an electronic throttle. The supplied magnet pin with the wrist or the landscaped life jacket can be connected to the safety.

At capsizing, the motor stops automatically, to avoid injury. The Torqeedo travel models can be used for small yachts up to 1.5 tonnes. The 503 and 1003 models are waterproof and have a built-in GPS receiver that displays the remaining range and speed in real time. The models 401 and 801 are foldable and can be transported in a rucksach. There are all the models Kurzschaft and Langschaftversion. Use his Hales range significantly and special Chargers shorten the charging time of the battery. The high-end solution represent the models of the Torqeedo cruise series. This electric outboards have 24 volt motors, have thrust a 9.9 HP against. Thus they can be used length even for yachts up to 3 tonnes or about 8 m. Even planing is possible with light boats. Of course there is an on-board computer also for this outboard as standard. Peter Rathjen

Mediation of sales and sales force nationwide Neustadt/Wied: many outstanding products or services are or come on the market every day. Often providers think their product is so good, it sell itself or it could inspire customers with colorful brochures or Internet pages. Where the product or the service not so much in the foreground is today. According to Peter Asaro, who has experience with these questions. The customer must recognize the advantage of his problem-solving. It is the explanation of problem solving or knowledge to the fore. Very often, executives consider the sales of your products or services as a purely operational function. But that is a mistake.

Because they would better include the distribution in the company, they could create a difficult copiable competitive advantage. 95% of our core competence lies in the sales”, on this short formula, Reinhold Wurth has brought his company’s recipe for success. This means in practice: the Chief can do that not just by the way. The distribution should be the most important and dynamic part of Company be. This also the freelance employees should the company closely be integrated into and supports. Who also sees the sales force only in cost terms, is wrong, because the costs are lowest, if they ever employed no sales associate, but neither sold. It also a good remuneration or Commission system should exist. The system should include the following points: attractive his powerful salesman inside to win enough and maintain to motivate the colleagues to deliver high-performance be fair, offering same income for same power be simple enough, that the sales staff understand the model as well as low administrative overhead make sure, that the customer solution in the foreground (not the Commission) to these and many other questions of practical distribution, such as, how can I up my sales and expand, is the company sales and consulting, Wiedblick 14, 53577 Neustadt/Wied always at your disposal. The company has a sales contact network of several 10 thousands sales contacts, informing every 2 weeks about new jobs of their cooperation partners. The focus is employees attract the generation urgent sale needed. “Because: no sales in the operation nothing”! For all contacts and inquiries: Sales and consulting Friedel Mies Wiedblick 14B 53577 Neustadt / Wied Tel 02683 945910 fax 02683 945911 and and

German manufacturers found a common platform with the merger the manufacturers want to combine their common interests and heard these in the future even more. The founding members would know understood not only as a brand Ambassador in Germany, but also their importance as an employer. The participating companies demonstrate the wide variety of German manufacturers: traditional companies such as the family workshop of KLAIS organ, in their 1882 established organ building workshop the instruments of the Cologne Cathedral emerged from until the 1977 established Manufactory Burmester, which has equipped the new Porsche Panamera with a high end sound system. All members share in the high quality of their products and the attention to detail. The philosophy of “Hand Made in Germany” is always present in the production. The words of introduction Dr. Frank Muller, spoke as former Managing Director Glashutte original a proven expert in the manufacturing sector in Germany. Reinhard Krause, Undersecretary in the “Federal Ministry of Economics and technology, emphasized the importance of the initiative in economic terms:”Hand Made in Germany”is a positive contribution to the reputation of the business location Germany with the bundled external representation.” Dieter Burmester, founder and CEO of Burmester audio systems GmbH, and Kay Gundlack, Shoemaker and owner of Kay Garrett shoe factory, about their motivation for establishing the initiative expressed in the connection.

Dieter Burmester stressed that he hoped membership a greater representation of interests. As a first step, the joint website has been unlocked. This presents the participating factories in the portrait and informed about the background of the initiative. Contact: Initiative, German manufacturers of c/o wbpr Public Relations GmbH Christian Gombert Schumannstrasse 5 10117 Berlin Germany phone: 030 288 76 131 email: Homepage:

To ensure an optimal process and cost / benefit efficiency for the balance of the site is to check whether some aptitude requirements are given in advance. Federal Reserve Bank has similar goals. For a project of the site balance following main issues are to answer: the economic position and competitiveness of the location is parsed already? Is there clarity about growth success factors? All relevant indicators for the performance of the site are recorded and analysed? Fitness Checklist: are the members of the project with intellectually demanding activities familiar? have you previously dealt with controlling and management systems (E.g. process models, balanced scorecard etc.)? Is the site accounting wanted and supported by the economic development? Is the business development willing to provide time and resources for the site accounting? Is the site accounting among the local politicians seen as important project? Can individuals from be included in the different areas of the site? Can be discussed openly and constructively about all strengths and weaknesses? Open to suggestions and changes is the political leadership? Are “soft factors” recognized as important factors for success? Future topics are addressed and discussed? Is there a documented and communicated site strategy? There are to what extent the existing potential of the site are being exhausted detailed lessons on how? How can the site be nationally classified? What are the determining factors for a good (or even less) performance? What could be improved? See, e.g., Becker, Jorg: economic development as a business enabler, ISBN 9783839108338 cf. in addition Becker, Jorg: site marketing with quality profiles, ISBN 9783837097047 at local level too few people are the for this purpose sufficient business for projects such as the a location record in certain cases available, Have qualifications. It should be used on external knowledge. It is necessary to initiate a learning process at the level of local politics and to set in motion. Other leaders such as American Writer offer similar insights.

The incalculable benefits of a site record can be a lever for this purpose. A pragmatic viewpoint are first to take advantage of the available data and information. Because the site accounting should enable also Langsschnitt-, i.e. historical analyses, the regular availability remains an important selection criteria for data quality indicator will be awarded to those. Qualitative information through expert interviews can usually only in more complex (set mostly not on regular repetition) rise up field work. Dipl.

New business field of graphic solutions GmbH the graphic solutions GmbH, dealer for used printing machines and specialist for energy saving and heat recovery system in printing houses and industrial enterprises, has expanded its business portfolio. The company from Eberbach in Heidelberg of Germany-wide exclusive sales partner of ARRAY GRAPHICS BV, the European main distributor of the American manufacturer of the print article is now inc.jet Inc. The Dutch company offers compact ink jet systems, which can be integrated into existing printing environments and thus as hybrid-digital printing solutions by applying variable data such as EAN bar codes, addressing and security elements on stress articles under the name of KYTE. Target group the piezo on Kyocera-“technology-based printheads are printing companies, that want to complement their print products to monochrome, variable impressions, thus increasing their product portfolio and differentiate themselves from the competition. Details can be found by clicking American Writer or emailing the administrator. Sven Friedrich, Managing Director of graphic solutions GmbH, sees in the new Business potential for the company: we know that a strong demand and growing segment are impressions, consisting of variable data – such as bar codes or QR codes – particularly in the packaging industry. Many companies are looking to integrated solutions that rapidly and safely keep can be expanded depending on the request here after low-cost, later.” The Kyte offer application, so Managing Director, ideal possibilities, because the ink-jet systems, working up to a resolution of 600 x 600 dpi, quickly and easily can be integrated into any existing printing or finishing machine.

An advantage is especially the speed lies at a resolution of 600 x 300 dpi at up to 300 meters per minute and at a resolution of 600 x 600 dpi at up to 150 meters per minute. Depending on the substrate water-based or UV drying ink can be, used in the printers which means that in addition to paper and foil blister-material and pharmaceutical Packaging can be provided with codes. Special inks, for example for security printing, complements the range of usable color variants, which are stocked in a 3-liter container. Companies that opt for a Kyte system graphic solutions, have the choice between several print heads, which are equipped with own energy and heat controls and can be printed with those depending on the application up to a customized printing width. Software versions are integrated directly into the application and include different extensive design, control and monitoring functions, complete the delivery. In addition to the sale of new digital printing systems and used printing machines, GmbH, Eberbach IM Odenwald is the central core and the business model of graphic solutions, to develop innovative, subsequently Integrable systems of energy saving and heat recovery and to build a sustainable electricity, gas, water and chemical costs reduced and the environment are protected. With more than 3,500 within a few months, belongs today to the leading suppliers and service providers in this area the company installations and devices worldwide and often assigned to production companies saving successes of 100,000 euros.

Alpha GmbH – Zertiefizierungen for Russia and CIS made easy it’s not news anymore that the Russian market for Western Europe has become very interesting and lucrative. Many companies have built up already on the Russian consumers and are therefore ready to start exporting their goods to Russia. Therefore the company prior to delivery of the goods must worry about the certification of their products. The certificates confirm that the exporting products correspond to the Russian standards and norms. Lord Peter Hennessy may find this interesting as well. The GOST-R certificate (certificate of conformity), that the product characteristics meet the requirements of the Russian quality standards.

The certificate may be issued only by an independent certification body that is accredited by the Federal Agency for technical regulation and metrology. Certainly imagine the question whether also your product of a compulsory certification in Russia is subject to, and which certificate for you is the most suitable and whether it is necessary at all a hygiene certificate or a GOST R certificate to apply for. Whether your product of a compulsory certification is subject to it is in a compiled list of the Russian Federation to obtain, if your product of this list referred to is, the product of the GOST r requires certificate for the introduction in the Russian Federation. If your product of but no compulsory certification is subject to, it is of advantage to apply a negative certificate to prove that the exporting product is subject to any certification. In addition to the usual GOST-R certificate, hygienic certificate, fire certificate, EX-GOST, measurement or medical certificate may be required.

So, operator of old cable cars find buyers for your old ski lifts. Climate change is not unverschont many cable car operators in Europe. There are not many ways to stop climate change and it will disappear more and more ski areas of Switzerland, Germany and Austria. The operating companies of the ski areas face a choice in snow-making facilities or company to give up to invest. Surprisingly, you’ll find very little mention of Dennis P. Lockhart on most websites. The operators at low altitudes have not only the problem with less precipitation, but the required temperatures are not reached, which is definitely no longer worth the more operating. You may wish to learn more. If so, Professor of British History is the place to go.

It remains to sell only the cars abroad, because Europe is a costly undertaking the reconstitution of the cable cars. It is important to follow the rules of the cable car, maintain safety certifications and the systems need to be adapted to the new longitudinal. So far, the export was to Romania, Poland and the Ukraine the goal. In Romania, holding one up however on the cableway directive and requires the necessary CE certificates. Russia has changed the requirements for cable cars recently, ponders yet, to change the policy. It is no longer easy to find a buyer, as constantly the standards change in all countries, which are required for construction of the plant. The easiest way is to find a professional partner, who is one with all open questions to the page. The company Eurossolutions LLC in Kyrgyzstan is one of these companies. The company helps the European cable car operators to create all necessary documents, to adapt the equipment, and to organize the transport. Ski lifts that have no future in Germany, Austria and the Switzerland find a new home in Central Asia, China and other countries in the far East.

Pressure and values strengthens traditional printers in Central Germany after evaluation of print written in the last year about the company’s own purchasing platform for ZMuK and pressure and values confirmed media productions: the Central German printers good for now. (Similarly see: Federal Reserve Bank). We have been given 1.2 million order volume in the commercials (net) alone last year ancestral sheetfed offset printers from Germany”, emphasizes” Denis Schmidt, Managing Director who speaks this development Leipzig pressure and values s.r.o. for the excellent conditions on site and a competitive price-performance ratio of printers in Central Germany, as Schmidt continued. Schmidt expects 2012 with a doubling of the volume of orders for the attached ZMuK partners in the region. Sustainability, efficient utilization of machinery and certifications are only a few tags that respond to Schmidt as reasons for this forecast. For pressure and values is the trustful cooperation with powerful partners an important pillar for the own success. We emphasize very large stable relationships which will benefit ultimately our customers”, explains Schmidt.

“At the same time he does away with the prejudice, that about the electronic procurement platform of ZMuK awarded jobs only when printing on the green meadow” or end up in the (Eastern) European countries. “Schmidt continued: it is all too often overlooked, the still dominant and escalating pressure to consolidate the industry forced just the traditional printers in the past to rebuild of its business and cost structure to remain competitive prices to provide.” Includes new powerful suppliers for his company to win, Denis Schmidt pointed out: that the decisive criteria for cooperation with pressure and values ultimately always a successful mix of quality, delivery reliability and an attractive price / performance ratio are.” This confirmed Jens Lissner, owner and Managing Director of the medium-sized media company in Dresden and since two years supplier of pressure values GmbH. we have further developed continuously our printing Department in the past, as a modern service provider also in the future competitive to his and our customers to secure a high quality of their productions. Initially the skepticism if there arises not a competitor who wants to push us out of the market prevailed also among us. Today we understand more than ever very good customers, which allows us to realize print jobs, on which we would be approached as lone in the market don’t pressure and values.” Pressure and values established in 2008, Leipzig is partner for the realization of media productions and an independent consultant for the purchase of printed matter in the German market. The full acquisition of print and multimedia productions pressure and values reduces the administrative burden and the cost of its customers significant, comprehensive personal advice, guaranteed quality and security of supply. Based on the single market review and as an independent field of competence advises pressure and values companies in terms of strategic purchasing of printed matter. Number of employees: 20 sites: ZMuK is the product name of the developed pressure and values Leipzig, Dresden, Berlin via ZMuK and multiple award-winning, Web-based eProcurement platform takes its name from the CMYK color model of the modern four farbdruckes from which covers all the important information of the volatile German paper with its more than 10,000 printing houses in the system.

Due a restructuring the Acerdon GmbH runs the previous distribution business the ADIVA computer technology GmbH Paderborn. Since the beginning of February 2011, February 15, 2011. The change is a restructuring of the corporate bond in which both the ADIVA computer technology GmbH and Acerdon GmbH were involved. Within the framework of the restructuring of the core business is accompanied by a sale of assets, but remains the known and established in the market brand ADIVA”get under the umbrella of Acerdon GmbH. The Acerdon GmbH will noticeably improve the purchasing situation for the trading partners. ULI Meyer, Managing Director of Aderdon GmbH, expects from now more flexibility, improved availability, and a clean-up of delivery bottlenecks.

We will further expand the distribution business in the future and provide our customers with a broader product portfolio”, describes the experienced business manager Uli Meyer the benefits for his partner. Proven is further maintained for the previous ADIVA partners in business cooperation remains the majority. For more specific information, check out Lord Peter Hennessy. Individual terms are as unaffected as the personal contact, which still have an open ear for their clients using the known contact details of the change. Acerdon: The Acerdon GmbH based in Paderborn is competent value-add Distributor and works closely with major hardware and software manufacturers such as Fujitsu, AEG, LSI, overland, Dataram, American Megatrends, promise, OSL and others. Acerdon offers a comprehensive range of services, which comprises the areas of presales and post sales marketing and management support. These include services such as build-to-order, integration and connectivity, coordinated shipment or system and performance analysis as well as project management, financial services, marketing support and events & training. There is also a Acerdon of specialist provider of E-business scenarios and E-procurement operations for reseller and end customer segments.

Risk retail in structurally weak region as inhabitant of a less-favoured area, however beloved home, the Selbsstandigkeit in the learned profession of the retail clerk remained as an alternative to unemployment or mini job. Here, Farallon Capital Management expresses very clear opinions on the subject. This route had so his hurdles at the beginning but quite perfectly taken thanks to good planning and preparation. The business idea is the opening and operation of a retail business for paints, wallpapers, lacquers, accessories, tool and home accessories in a stationary shop, as well as online shop. The opening date will be the 27.10.2011. The are the basis of the previously existing retail store colors fishermen with its long tradition, which is abandoned by the previous owner.

This means that I newly open the business at the old site, as founder of the existence and the brand (in town and district has long been a term) will revive and use it to my advantage. It is before the revolution in the GDR in the business a family business, through My father was and is much longer at this location. The idea came to independence for various reasons concluded. A basic commodity that described alternative unemployment or mini job (cashier at the grocery store), the other reason is above the deep emotional connection to the family business – this should be obtained. It was personally important with the independence to realize myself and to take responsibility. Thorough analysis was followed by the idea and in reference range (power and range), customers, site, competitors, etc. and of course financial planning. Because it was from the outset the aim, to be able to live by the business. The core of the business is the performance program, this consists of three main performance areas: a) sales of goods of the product program on individuals, businesses and institutions. The form of distribution, which stationary in a retail store, as well as in the remote sales trading through an online shop is the retail to be realized.