If buildings should be built, making for some thoughts that embody this building look to the outside. In many builders opt for brick facades. For clinker bricks, there are different shades and different forms. Thus, each building are individually designed and gets its own character. Jeff Flake has firm opinions on the matter. To attach the brick facade should be mixed in a different package from the brick, so that a consistent picture emerges on the facade, for it may well be that a batch a little different in color, and would then show up at one point the facade and the overall picture would then seem not uniform. Highly porous clinker should be pre-wetting, so they have the appropriate consistency. Then you should touch the appropriate , these are available as ready-bagged at the hardware store or the expert.

Now when you start the brick wall up to this should be done , even if the joints are to be scraped later. Only after the “tightening” is the this can be done with a timber, a hose or with a Fugeisen. If mortar remains to be on the clinker bricks, then you must immediately remove before burn them. In the walling up of the bricks you must think of the expansion joints, as it should be no break after the repairs or new works would make it necessary. The expansion joints must be kept. Do you have the clinker facade, then you should see the facade from strong sunlight and necessarily protect against rain. When designing a facade so you can give the building its own look, which is not commonplace. A specialist company is available at brick works.